top of page

ICP 7.5Hp Air-Cooled Reciprocating Air Compressor Model-#ICP-B71V84-208-230/1/60-Elite: 24 CFM@ 175 PSIG, 80G Vertical ASME Coded Tank Incls After cooler.


ICP 7.5Hp Reciprocating Air Compressor Model-#ICP-B71V84/208-230/1/60-Elite. The compressor is air-cooled, 208-230/1/60 voltage, it will deliver 24CFM @ 175PSIG and 27CFM @ 150PSIG. The compressor is tank mounted on an 80 Gallon ASME coded Vertical air receiver. It features a Solid cast iron pump with HD oversized Stainless Steel Disc and spring valves, it has a Centrifugal unloader, the pump is designed for maximum output and HIGH volumetric efficiency (over 84% efficient) with a Low pump RPM pump, The pump features-Oil sight glass, Oil drain and fill on front of compressor pump, 80% duty cycle, two piece connecting rods with rod inserts, oil control ring & three compression rings for longer run life and improved efficiency, HD oversized taper roller bearings on both ends of the crankshaft for long life, wrist pin needle bearings, oversized built in innercooler less likely to get damaged and sized for better innercooling.


The ICP compressor package features a Heavy duty High Efficiency EPACT NEMA motor, V-belt drive system, OSHA style totally enclosed belt guard, HD steel enclosure intake filter silencers with 5 micron filter element, adjustable motor mounting, pressure switch, tank pressure gauge, ASME coded pressure relief valve. The is an "ELITE" Series and it also includes- Full Voltage Starter Mounted & factory pre wired, Low Oil Monitor that is mounted and pre wired back to the starter so compressor will not operate if oil is low and Vibro Tank Isolator Pads.


Flat Shipping CostFOB Delivered
Vertical or HorizontalVertical
Gallon Size80


*NOTE: 5HP Elite Units do not have Aftercoolers


Product Code: ICP-B53V84-230/3/60-Elite

ICP 7.5Hp Single Phase Air-Cooled Reciprocating Air Compressor

    bottom of page